Toilets

Buildmat supplies toilets and toilet suites to renovators, builders and homeowners across Australia, so the range is built around what actually works in local bathrooms - the right trap types, set-outs, water inlets and WELS-rated flush systems, not just the look.

Whether you're replacing a single toilet or planning a full bathroom renovation, you can filter by type, flush rating or finish to narrow things down. For a full walk-through of types, ratings and installation checks, our toilet buying guide covers the detail.

Shop toilets by type

There's no single best toilet for every bathroom - the right one depends on your plumbing, your layout and your budget. Here's how the main types compare, and our guide to toilet types goes deeper.

• Back-to-wall toilet suites - the pan sits flush against the wall to hide the trap and make cleaning easier. Our most popular choice for family bathrooms.
• Wall-hung toilets - pan and concealed in-wall cistern mount off the floor for a floating, space-saving look that's easy to mop under. Plan these early, before the wall framing and plumbing are locked in.
• Rimless toilets - no inner rim, so water washes the full bowl. Fewer spots for grime to collect and less scrubbing between cleans.
• Smart toilets - bidet washing, heated seats, drying and automatic flushing at the comfort end of the range. Check power and water requirements before you order.
• Bidet toilets - better washing comfort and hygiene without adding a separate fixture.
• Close-coupled suites - the traditional connected pan and cistern. Familiar, reliable and usually the most affordable way to replace an existing toilet without changing the layout.

What we'd check before you buy

• Trap type and set-out. Check where the waste leaves the existing toilet before you choose a new suite. S-trap and P-trap configurations are not interchangeable, and the set-out should be measured from the finished wall to the centre of the waste outlet. When a replacement is nearly right but will not sit back against the wall, the set-out is often the reason.
• Water inlet position. Confirm whether your water inlet enters through the back of the cistern or the bottom. Back-entry gives a tidier concealed look, while bottom-entry can be easier to access later. This small check prevents an avoidable plumbing change once the new toilet arrives.
• Cistern and pan configuration. Decide whether you need a complete suite, a pan, a cistern, or an in-wall system before adding to cart. A wall-hung or concealed-cistern toilet also needs compatible components and planning before the framing is finished.
• WELS rating and flush system. Compare the WELS rating and flush details on the product page rather than assuming every toilet performs the same way. For households focused on easier cleaning, compare rimless and tornado-flush options alongside the rating.
• Flush valve and water inlet. A dual-flush toilet uses separate half-flush and full-flush settings to manage water use, while the inlet valve refills the cistern after each flush. If you are replacing an older suite, check that the new toilet’s water inlet and button configuration suit the plumbing and access in your bathroom. For a more thorough bowl wash, compare the rimless and tornado-flush toilet options in the range.
• Projection, height and clearance. A compact projection can make a small ensuite feel less cramped, while a comfort-height pan can be a better fit for some households. We regularly see a suite fit on paper but crowd a vanity or door swing, so measure the clear floor space as well as the plumbing.
• Toilet material and construction. Most toilet pans and cisterns are made from vitreous china - a hard, glazed ceramic that is built for daily bathroom use and easy cleaning. One-piece toilets combine the pan and cistern in one unit for a cleaner silhouette, while two-piece toilet suites separate them for a more traditional replacement setup. The material is rarely the deciding factor; the trap type, projection and cistern configuration will usually have more impact on whether the toilet works in your bathroom.
• What's included. Check the individual product listing for the pan, cistern, seat, buttons and connectors included with the model. In-wall toilets and concealed cisterns are often a multi-part selection, not a single box.

For a deeper explanation before you narrow the range, see our toilet buying guide and guide to toilet types.

Toilet delivery, installation and warranty

We ship toilets Australia wide, whether you are replacing one suite or ordering for a full bathroom fit-out. Toilets are bulky and breakable, so check the product dimensions, access through the site and storage space before delivery arrives. A licensed plumber should confirm the trap, set-out, inlet position and compatible connectors before installation - especially for wall-hung toilets, concealed cisterns and smart models with power requirements.

Warranty cover depends on the toilet and manufacturer, not one standard period across every model. Check the individual product listing and manufacturer warranty before ordering, then keep your proof of purchase and inspect the product before installation. If something does not look right, contact us before the toilet is fitted.

Toilet prices at Buildmat

Standard close-coupled and back-to-wall suites are the most affordable way to replace an existing toilet. Wall-hung and rimless suites sit in the mid-range, where you're paying for the concealed cistern hardware and the cleaner finish. Smart and bidet toilets run from around $1,000 for entry-level models up to $6,000+ for fully featured units. Whatever the budget, factor in installation - wall-hung and in-wall cistern setups cost more to fit than a standard floor-mounted suite.

Finish the whole bathroom

A toilet is rarely the only fixture being replaced. Match a concealed system with toilet cisterns and toilet buttons, then finish the zone with toilet seats, toilet roll holders, toilet fixtures and accessories and bathroom accessories. If the project extends beyond the toilet, explore bathroom vanities and bathroom tapware as you lock in the room layout.

A toilet suite is one part of the setup. You may also need cistern parts, flush buttons and connectors from our toilet fixtures and accessories range, plus the finishing pieces that are easy to leave until last - a matching toilet roll holder and toilet brush. If you're carrying a finish like matte black, brushed brass or gunmetal through the room, it's worth matching it on the accessories too.

Renovating the whole bathroom? Think about how the toilet works alongside your tapware, vanity, basin, towel rails and shower heads.

Our complete bathroom renovation guide is the place to map out the bigger decisions.

Shop toilets by brand

• Caroma toilets. A broad range of Australian bathroom staples, including wall-faced, rimless and in-wall options.
• Johnson Suisse toilets. Contemporary toilet suites across standard, comfort-height and smart configurations.
• Oliveri toilets. Practical back-to-wall and comfort-height options for modern homes.
• Fienza toilets. A strong choice for modern profiles, rimless flushing and varied finishes.
• Lafeme toilets. Smart and bidet-focused toilets for customers prioritising integrated comfort features.

Prefer to choose in person? Visit the Buildmat Selection Centre

Not sure which toilet will fit your bathroom or work with the plumbing you already have? Our team helps renovators and builders compare toilet types, set-outs, inlet positions and in-wall components every day. Visit our Buildmat Selection Centre in Hughesdale by appointment only - book an appointment - or call into our Dandenong showroom and warehouse. We ship nationally, and you can email plans or measurements to [email protected] or call 1300 123 122 before you order.

Read more: A Renovator's Guide to the Best Toilets

Toilets inspiration