
Billi
Read moreRead less
SHOP BY WATER TYPE
Find the right multifunction tap for your home
Boiling
Instant near-boiling water for teas, coffee and cooking.
ViewBoiling + Ambient
Boiling plus filtered ambient water — hot and fresh, on tap.
ViewBoiling + Chilled
Boiling and crisp chilled filtered water from one tap.
ViewBoiling + Chilled + Sparkling
The full range — boiling, chilled, and sparkling filtered water.
ViewChilled + Sparkling
Chilled and sparkling filtered water — refreshment only.
ViewWe supply Billi taps to homeowners, kitchen designers and builders fitting out new kitchens, butler's pantries and renovations. Filter by water type and finish, and compare other systems in our filtered water taps range.
Why choose Billi Taps
Billi is one of the few under-bench water systems designed and manufactured right here in Melbourne. Its water-cooled technology is the reason many Billi units don't need cupboard vents or grilles cut into your joinery, which keeps cabinetry clean and installation simpler. Every system ships with sub-micron filtration as standard, so the water out of the tap is filtered whether it comes out boiling, chilled or sparkling.
The other big draw is the Gooseneck Multifunction Mixer Tap. It does the job of your everyday kitchen mixer and your filtered water tap in one, so you only need one tap hole and one tap on the bench. Customers redesigning a kitchen around a Billi often tell us that's what sold them on it, because it frees up the space a second tap would have taken.
Shop Billi by water type
- Boiling water: Instant near-boiling filtered water for tea, coffee and cooking.
- Boiling and ambient: Boiling plus room-temperature filtered water, with the Billi Home BA range.
- Boiling and chilled: Instant boiling and chilled filtered water from one tap, led by the Billi Home BC.
- Boiling, chilled and sparkling: The full set of water types, from the Billi Home BCS, B5000 Sparkling and OmniOne systems.
- Chilled and sparkling: Refreshment-only systems from the Billi Home C and Billi Home CS ranges, for households that already have a kettle they love.
- Home FT range: See the Billi Home FT collection for the full line-up.
Billi by tap style
- Gooseneck Multifunction Mixer Tap: Replaces your standard kitchen mixer, giving you hot and cold mains water plus filtered water from a single tap.
- XL Levered and XT Touch dispensers: Dedicated filtered water dispensers that sit beside your existing kitchen mixer.
- Slimline and extended spout dispensers: Round and square slimline designs that suit smaller benches and butler's pantries.
- Finishes: Chrome, Brushed, Matte Black, Matte White, Gunmetal Grey and Urban Brass, with the full Billi Brushed range in its own collection.
What we'd check before you buy
Cupboard space under the sink. This is the one we see trip up installs most. Under-bench units vary in size, and sparkling systems add a CO2 cylinder that needs to stand alongside. Measure the clear space under your sink after the waste and any pull-out bin, then check it against the under-bench dimensions on the listing.
Power outlets. Billi systems plug into a standard 10 amp outlet, which needs to sit within about a metre of the unit. Some sparkling systems run two under-bench units and need two outlets. Get your electrician to add them before the cabinetry goes in, not after.
How many tap holes you need. A Gooseneck Multifunction Mixer Tap takes the place of your kitchen mixer, so you only need one hole. A dispenser sits alongside your existing mixer, so you'll need a second hole in the benchtop or sink. Plan this before your stone is cut.
Water pressure. Some systems specify a minimum mains water pressure, which the listing shows. If you're on low-pressure supply, check this with your plumber first.
Special order finishes. Some finishes, including Urban Brass and Gunmetal Grey on selected models, are made to order. If your kitchen has a fixed install date, check lead times with us when you order.
Billi prices at Buildmat
Chilled-only and chilled and sparkling systems with a slimline dispenser start from around $2,450. Boiling and ambient systems sit at around $2,700 to $5,500, and boiling and chilled Home BC systems at around $4,900 to $7,500. Full boiling, chilled and sparkling systems run from around $5,500 to $9,600. Gooseneck Multifunction Mixer versions sit above dispenser versions of the same system, and special finishes add to the price. Stand-alone Billi gooseneck mixer taps start from around $1,000. Installation by a licensed plumber is required.
Finish the kitchen
- Kitchen sinks and undermount kitchen sinks to pair with your Billi tap.
- Kitchen mixers if you're adding a Billi dispenser alongside a separate mixer.
- Replacement water filter cartridges for ongoing maintenance.
- Kitchen cabinet handles in a finish that matches your tap.
- Boiling water taps to compare Billi with other brands, including Zip.
Get expert advice at the Buildmat Selection Centre
Not sure which Billi tap system suits your household, or whether it'll fit under your sink? Book an appointment at the Buildmat Selection Centre in Hughesdale, or drop into our Dandenong South showroom. If you're outside Melbourne, we ship Australia-wide, and you can send your cupboard measurements and kitchen plans to [email protected] or call 1300 123 122 before you order.




































































































































