The pump is a horizontal multistage pressure system pump supplied wired and ready to install. Used especially for supplying water to domestic installations.
The pump is characterised by:
Automatic electronic pump control fitted and wired.
Automatic electronic control provides run dry protection and constant pressure at low flows. Automatic electronic control has auto restart and in-built check valve.
Corrosion resistant pump body, diffuser and impeller.
Mechanical shaft seal.
Stainless Steel barrel union
Comes complete with plug and play leads.
240V single phase TEFC motor with in-built auto reset thermal overload.
Flows to 105 l/m
Heads to 56m
Rated voltage:240V Mains frequency:50 Hz Rated output: 1300W Horse Power:1.7HP Flow Rate:105L/m Taps:10 taps Current: 8.7 amps Capacitor:40uF Motor duty:Continuous Motor Type: Asynchronous, TEFC Motor Protection:In-built thermal overload Ingress protection:IP 55 Insulation class:F Power cable length:1.2 m H07RNF Gross weight: 20 kg Pump Dimensions: 446L x 178W x 385mmH Liquid: Clean water temperature range: 2-50 °C Materials:Pump body, Diffuser, Impeller:Stainless Steel Mechanical seal: Carbon/Ceramic/Nitrile o rings: Nitrile Installation: Maximum ambient temperature: 50 °C Maximum operating pressure:8 bar Pipe connections suction/discharge: 1.25 ” BSP F / 1″ BSP M
2 Year Bianco Pumpz Warranty
AS/NZS 4020 Drinking Water Approved.
Bianco Rainsaver MK4E
Rainsaver MK4E Changeover Device.
2 Year Rainsaver MK4E Infield Warranty
Designed to operate with pumps up to 800kPa.
12V Low voltage Float.
WaterMark approved for connection to all town water supplies.
Aesthetically designed and requires no weatherproofing.
For self-controlled pumps up to 1.5hp, 1.1kW, 240V.
For an Operation Installation Manual on RS4e, please click here.