Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase totally enclosed motor in insulation class F with thermal overload protection. The pump is fitted with a suction strainer.
The impeller is a Semi-open impeller for 7/16 in free passage suitable for pumping groundwater, surface water, rain water and similar liquids.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings
The pump is ready for use as it is fitted with carrying handle and is supplied with a 9.843 ft mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.
2 Year Standard Warranty
Type of impeller: Semi-open Maximum particle size: 7/16 in Approvals on nameplate: CSA
Pump housing: Stainless steel DIN W.-Nr. 1.4301 AISI 304 Impeller: Stainless steel DIN W.-Nr. 1.4301 AISI 304
Pump outlet: 2″ NPT Maximum installation depth: 9.843 ft
Pumped liquid: any viscous fluid Liquid temperature range: 32 .. 131 °F Density: 62.29 lb/ft³
Type of motor: PSC Power input – P1: 2.37 W 1.8 kW Main frequency: 60 Hz Rated voltage: 1 x 220-230 V Rated current: 9 A Starting current: 35 A Cos phi – power factor: 0,98 Rated speed: 3350 rpm Capacitor size – run: 20 µF/400 V Enclosure class (IEC 34-5): IP68 Insulation class (IEC 85): F Length of cable: 9.843 ft Type of cable plug: NONE