The pump is fitted with ring stand and carrying handle and is supplied with a 25 ft mains cable and a level switch for automatic start and stop.
The impeller is a Vortex impeller for 1 15/16 in free passage suitable for pumping surface water, groundwater, wastewater and similar liquids.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
The motor is insulation class F with thermal overload protection and has long-life deep-groove greased-for-life ball bearings.
The pump has 2″ NPT discharge port and is ready for installation either free-standing or on an auto-coupling system.
Type of impeller: Vortex Maximum particle size: 1 15/16 in
Pump housing: Stainless steel DIN W.-Nr. 1.4301 Impeller: Stainless steel DIN W.-Nr. 1.4301
Pump outlet: 2″ NPT Maximum installation depth: 25 ft
Pumped liquid: any viscous fluid Maximum liquid temperature: 104 °F Density: 62.29 lb/ft³
Type of motor: PSC Power input – P1: 1.4 kW Main frequency: 60 Hz Rated voltage: 1 x 220-230 V Rated current: 6.4 A Cos phi – power factor: 0,99 Rated speed: 3400 rpm Capacitor size – run: 16 µF/400 V Enclosure class (IEC 34-5): IP68 Insulation class (IEC 85): F Length of cable: 25 ft Type of cable plug: NONE