The pump is fitted with ring stand and carrying handle and is supplied with a 5 m mains cable and a level switch for automatic start and stop.
The impeller is a Vortex impeller for 35 mm free passage suitable for pumping surface water, groundwater, wastewater and similar liquids.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
The motor is insulation class F with thermal overload protection and has long-life deep-groove greased-for-life ball bearings.
The pump has R 2″ discharge port and is ready for installation either free-standing or on an auto-coupling system.
Type of impeller: Vortex Maximum particle size: 35 mm
Pump housing: Stainless steel DIN W.-Nr. 1.4301 AISI 304 Impeller: Stainless steel DIN W.-Nr. 1.4301 AISI 304
Pump outlet: R 2″ Maximum installation depth: 2 m
Pumped liquid: any viscous fluid Maximum liquid temperature: 40 °C Density: 998.2 kg/m³
Type of motor: PSC Power input – P1: 1 kW Main frequency: 50 Hz Rated voltage: 1 x 230 V Rated current: 4.6 A Cos phi – power factor: 0,98 Rated speed: 2810 rpm Capacitor size – run: 16 µF/400 V Enclosure class (IEC 34-5): IP68 Insulation class (IEC 85): F Length of cable: 5 m Type of cable plug: SCHUKO