Sololift2 WC-3 is a small, compact automatic lifting station suitable for pumping of wastewater off places in private dwellings where wastewater cannot be led directly to the sewer by means of a natural downward slope. Sololift2 WC-3 is suitable for pumping wastewater from a toilet containing toilet paper and faeces with additional connections on the lid and to the sides of the tank for e.g. washbasin, shower or bidet. The pumping of liquids containing other material may cause faults and limit the scope of guarantee.
Sololift2 WC-3 is typically used to dewater:
Toilet, washbasin, shower and bidet in basements below sewer level, in connection with the renovation or modernisation of existing buildings, where the location may be remote from the main soil pipe so that a natural slope cannot be established.
Extremely low switching levels for lowest construction heights, advantageously in case of connection of a shower receptor.
Compact lifting equipment
Cable with or without plug (see technical data)
Horizontal or vertical fastening possibility of discharge hose connector with several adaptors for pipes with Ø22-40mm
Integrated non return valve
Dry and high performance motor unit incl. thermal protection, pressure switch and controller
DN100 toilet connection hose
Two flexible connectors for inlet (adjustable in height) of pipes Ø36 or 40
Slot for an alarm board with buzzer (accessory)
Manual anti clogging function and separate drain connection for service
Venting valve with overflow protection
Uplift fixation clips
Design according to EN12050-3 and production inspection by external institute with unique features focused on quick installation, long lasting operation and easy clean service.
Approvals on nameplate: CE,TR,CSA Curve tolerance: ISO9906:2012 3B
Size of suction port: 1.5/2. 1.25/1.5. 4 inch Size of outlet port: 0.75/1/1.25 inch Number of leads: 3X0,824MM2
Pumped liquid: any viscous fluid Maximum liquid temperature: 122 °F Density: 62.29 lb/ft³
Power input – P1: 750 W Main frequency: 60 Hz Rated voltage: 1 x 110-120 V Rated current: 6.8 A Cos phi – power factor: 0,97 Rated speed: 3468 rpm Enclosure class (IEC 34-5): IP44 Insulation class (IEC 85): F Length of cable: 3.937 ft Cable type: SJTW