{"id":1839425159238,"title":"Davey HP85-08T Home Pressure System With Torrium 2 Pressure Controller","handle":"davey-hp85-08t-home-pressure-system-with-torrium-2-pressure-controller","description":"\u003cdiv class=\"summary entry-summary\"\u003e\n\u003cdiv class=\"product_meta\"\u003e\u003cspan class=\"posted_in\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe HP Pressure System consists of an HP pump fitted with a Torrium®2 controller. The Torrium®2 is supplied connected electrically to the HP pump motor for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy non-tradesmen installation and assembly\u003c\/li\u003e\n\u003cli\u003ePositive safety under varied weather conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe combination of the high pressures supplied by the jet assisted HP pump and constant flow control provided by the Torrium®2 enables consumers to enjoy the benefits of a strong comfortable shower from a pump that does not cycle plus the reliability of adaptive technology. The complete HP Pressure System is compact and quiet providing for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy installation, especially where space is at a premium\u003c\/li\u003e\n\u003cli\u003eNon-intrusive operation, for consumer enjoyment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll parts of the entire system that are in contact with the water are manufactured from safe, corrosion resistant materials for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConsumer confidence that their water supply will be as good coming out as it was going into the system\u003c\/li\u003e\n\u003cli\u003eAbility to use the HP pressure system on a variety of water qualities\u003c\/li\u003e\n\u003cli\u003eCompliance with the strict requirements of ISO 9001.2000 quality standards ensures consistency of quality of the system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n[TABS]\n\u003ch5\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eIdeal for pumping clean, non-volatile liquids without fibres or solids in such applications as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHousehold water supply\u003c\/li\u003e\n\u003cli\u003eIrrigation\u003c\/li\u003e\n\u003cli\u003eWater transfer\u003c\/li\u003e\n\u003cli\u003eWashing systems\u003c\/li\u003e\n\u003cli\u003ePressure boosting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cb\u003eDavey Torrium 2 Pressure Controller\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReliable twin stage impeller design\u003c\/li\u003e\n\u003cli\u003eAll stainless steel construction for reliability and the ability to pump hot water up to 80°C\u003c\/li\u003e\n\u003cli\u003eCarbon\/Ceramic mechanical seal for reliable pump operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eMotor:\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTEFC motor constructed from corrosion resistant materials\u003c\/li\u003e\n\u003cli\u003eIP55 international protection rating for a high level of resistance to dust and liquid entry\u003c\/li\u003e\n\u003cli\u003eVoltage variants:\u003cbr\u003e220-240V, 50Hz, 2 pole\u003cbr\u003e220V, 60Hz, 2 pole (\/P models)\u003c\/li\u003e\n\u003cli\u003eClass F insulation\u003c\/li\u003e\n\u003cli\u003eHigher than normal 55°C ambient temperature rating for longer life and improved tolerance to voltage variations for peace of mind, even on the hottest days.\u003c\/li\u003e\n\u003cli\u003eProtected against both high operating temperature and high current draw by a built-in, automatically re-setting, thermal overload\u003c\/li\u003e\n\u003cli\u003ePermanently split capacitor for reliable starting even in low voltage circumstances\u003c\/li\u003e\n\u003cli\u003eMotor and pump are designed for frequent starts\u003cb\u003e \u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eConstant Flow and Even Water Pressure\u003c\/strong\u003e\u003cbr\u003eTo prevent annoying fluctuations in water temperature during showers, Torrium®2 uses its intelligence to provide households with constant flow to give even water pressure. It does this with its innovative pressure and flow sensors to start the pump on a pressure drop and to stop it on low flow (~1 lpm). This avoids pump cycling when there is continuing household demand for water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick Cut-in for Even Pressure\u003cbr\u003e\u003c\/strong\u003eTo give you strong pressure right from the start, Torrium®2 is designed to cut in quickly when it senses demand for water. It cuts in when the pressure has dropped to 80% of the previous top (shut-off) pressure. It uses its intelligence to automatically set this cut-in pressure each time the pump stops. In doing so, it allows the system to automatically accommodate for variations in pump performance or site conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdaptive Starting\u003cbr\u003e\u003c\/strong\u003eTorrium®2 is clever enough to detect the difference between normal water demand and a small leak in the system, such as a dripping faucet or a leaking cistern. For very low flows, Torrium®2 automatically adapts to reduce the cut-in pressure, which can be as low as 50% of its last shut-off pressure. This significantly reduces pump cycling to improve consumer satisfaction with the system. If normal flow is required in the house (\u0026gt;0.5 lpm), Torrium®2 will sense this and revert to normal mode and initiate an immediate pump start.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Status Check\u003cbr\u003e\u003c\/strong\u003eTo easily check the system status, Torrium®2 has three simple LED indicators.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRed LED – the system is in standby mode\u003c\/li\u003e\n\u003cli\u003eGreen LED – the pump is running\u003c\/li\u003e\n\u003cli\u003eYellow LED – fault condition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePressure Indicator Window\u003c\/strong\u003e\u003cbr\u003eTo give a quick guide to the system pressure, Torrium®2 has a pressure indicator window on the side of the inbuilt pressure vessel. If the colour band (green-yellow-red) is mainly green it indicates maximum pressure, whereas mainly red indicates low pressure. This indicator can help to analyse the occurrence of unwanted system leaks. If the colour band indicator is moving slowly towards red this signifies a slow drop in pressure and may indicate a small leak. To give a quick guide to the system pressure, Torrium®2 has a pressure indicator window on the side of the inbuilt pressure vessel. If the colour band (green-yellow-red) is mainly green it indicates maximum pressure, whereas mainly red indicates low pressure. This indicator can help to analyse the occurrence of unwanted system leaks. If the colour band indicator is moving slowly towards red this signifies a slow drop in pressure and may indicate a small leak.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGreater Hydraulic Performance\u003c\/strong\u003e\u003cbr\u003eFor better hydraulic performance to supply more pressure with less wasted energy, Torrium®2 has been designed with larger water pathways and no moving parts in the pathways. This performance versus loss equation is especially evident at higher flow rates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGreater Reliability\u003cbr\u003e\u003c\/strong\u003eTo diminish the likelihood of blockages, Torrium®2 is designed with no moving control parts within the water pathways giving greater reliability and performance with varying water quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry Run Protection and Auto Restart\u003c\/strong\u003e\u003cbr\u003eTo protect the pump from damage due to dry running, Torrium®2 stops the pump when it detects a loss of prime (no water supply) situation. To reduce system downtime, the Torrium®2 waits 5 minutes then goes into auto retry mode, whereby it will restart the pump to see if prime can be re-established automatically. An auto restart occurs at 5 minutes, 30 minutes, 1 hour, 2, 4, 8, 16 and 32 hours. Torrium®2 will also restart if it detects flow through the system (e.g. from mains water pressure returning with pressure boosting applications).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePump Protection – High Water Temperature Cut-out\u003cbr\u003e\u003c\/strong\u003eFor added security and longer life, a water over-temperature cut-out provides a second level of protection against closed head operation and repetitive cycling. For water temperatures above 70°C Torrium®2 will shut the pump down and the amber LED will be lit. When the water temperature drops to below 60°C, the Torrium®2 will allow the pump to restart.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePump Protection – Excessive Electrical Current\u003cbr\u003e\u003c\/strong\u003eTo protect the pump motor, Torrium®2 will shut the pump down and indicate a fault if it detects excessive electrical current being drawn. This occurs if the pump motor is subjected to locked rotor or if someone tries to manually override the Torrium®2 by continually holding in the prime button.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCorrosion and Scale Resistance\u003cbr\u003e\u003c\/strong\u003eTo allow Torrium®2 to be used with water of varying quality, its flow sensors are mounted on a high grade stainless steel plate with special anti-scaling electronic action, which only turns the flow sensors on during pump operation\u003cbr\u003e\u003cstrong\u003eExtra Draw off Capacity\u003c\/strong\u003e\u003cbr\u003eTo accommodate small leaks and to reduce cycling, Torrium®2 has an in-built spring loaded accumulator for extra draw off capacity. A spring loaded accumulator means low maintenance as there is no need for a pressure vessel with its regular air charging and checking. However, for increased draw off, an optional pressure tank, up to 18 litres, can be mounted on the vertical outlet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Surge Protection for Torrium®2\u003cbr\u003e\u003c\/strong\u003eTo protect the Torrium®2 controller from electrical surges and spikes, thus extending its life, it has an in-built metal oxide varistor (MOV). The status of the MOV can be checked in the viewing window on the back of the Torrium®2. The MOV is a sacrificial component and should it be consumed due to repeated power surges or spikes, it will almost always blacken the viewing port. This will indicate a non-warrantable Torrium®2 failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEase of Installation\u003c\/strong\u003e\u003cbr\u003eFor ease of installation, the plumbing can be connected to either the vertical or the right angle discharge outlet, which can rotate a full 360°. A spanner, sized to fit the coupling, is included in the box. Also, for increased draw off, an optional pressure tank, up to 18 litres, can be mounted on the vertical outlet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Connection\u003cbr\u003e\u003c\/strong\u003eFor easy installation, Torrium®2 comes with a 2 metre long power lead, fitted with an Australian three pin plug.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n[\/TABS]","published_at":"2018-11-12T14:36:46+11:00","created_at":"2018-11-13T15:10:30+11:00","vendor":"Davey","type":"Outdoor","tags":["Brand_Davey","Category_Outdoor","Price_$750 to $1000","Sub Category_Pump"],"price":82500,"price_min":82500,"price_max":82500,"available":true,"price_varies":false,"compare_at_price":92000,"compare_at_price_min":92000,"compare_at_price_max":92000,"compare_at_price_varies":false,"variants":[{"id":18506174005318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HP85-08T","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Davey HP85-08T Home Pressure System With Torrium 2 Pressure Controller","public_title":null,"options":["Default Title"],"price":82500,"weight":0,"compare_at_price":92000,"inventory_management":"shopify","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0023\/9881\/4278\/products\/davey-hp85-08t-pump-e1444200994252.jpg?v=1542082297","\/\/cdn.shopify.com\/s\/files\/1\/0023\/9881\/4278\/products\/davey-hp-with-torrium-2_aeafa393-a2b9-4b13-8d1f-b4b19df336e3.jpg?v=1542082307","\/\/cdn.shopify.com\/s\/files\/1\/0023\/9881\/4278\/products\/davey-hp-graph-c_b7251abb-587f-49bb-8055-290beed9d151.jpg?v=1542082318","\/\/cdn.shopify.com\/s\/files\/1\/0023\/9881\/4278\/products\/davey-hp-graph-d_4536bd6d-2115-494f-9c44-ec8eb0a3ba42.jpg?v=1542082326","\/\/cdn.shopify.com\/s\/files\/1\/0023\/9881\/4278\/products\/davey-hp-graph-e_ccad8316-c5ab-4e7a-b57a-35d6c8b01721.jpg?v=1542082354","\/\/cdn.shopify.com\/s\/files\/1\/0023\/9881\/4278\/products\/davey-hp-graph_24af5a2b-bea9-4071-92a8-a40873946e34.jpg?v=1542082372","\/\/cdn.shopify.com\/s\/files\/1\/0023\/9881\/4278\/products\/davey-hp-graph-a_cf16fe56-ca9e-4b11-b45b-26010bd34eb1.jpg?v=1542082381","\/\/cdn.shopify.com\/s\/files\/1\/0023\/9881\/4278\/products\/davey-hp-graph-b_c08f3f90-6c10-4f25-80e9-b4d55ce69376.jpg?v=1542082390"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0023\/9881\/4278\/products\/davey-hp85-08t-pump-e1444200994252.jpg?v=1542082297","options":["Title"],"content":"\u003cdiv class=\"summary entry-summary\"\u003e\n\u003cdiv class=\"product_meta\"\u003e\u003cspan class=\"posted_in\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe HP Pressure System consists of an HP pump fitted with a Torrium®2 controller. The Torrium®2 is supplied connected electrically to the HP pump motor for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy non-tradesmen installation and assembly\u003c\/li\u003e\n\u003cli\u003ePositive safety under varied weather conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe combination of the high pressures supplied by the jet assisted HP pump and constant flow control provided by the Torrium®2 enables consumers to enjoy the benefits of a strong comfortable shower from a pump that does not cycle plus the reliability of adaptive technology. The complete HP Pressure System is compact and quiet providing for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy installation, especially where space is at a premium\u003c\/li\u003e\n\u003cli\u003eNon-intrusive operation, for consumer enjoyment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll parts of the entire system that are in contact with the water are manufactured from safe, corrosion resistant materials for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConsumer confidence that their water supply will be as good coming out as it was going into the system\u003c\/li\u003e\n\u003cli\u003eAbility to use the HP pressure system on a variety of water qualities\u003c\/li\u003e\n\u003cli\u003eCompliance with the strict requirements of ISO 9001.2000 quality standards ensures consistency of quality of the system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n[TABS]\n\u003ch5\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eIdeal for pumping clean, non-volatile liquids without fibres or solids in such applications as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHousehold water supply\u003c\/li\u003e\n\u003cli\u003eIrrigation\u003c\/li\u003e\n\u003cli\u003eWater transfer\u003c\/li\u003e\n\u003cli\u003eWashing systems\u003c\/li\u003e\n\u003cli\u003ePressure boosting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cb\u003eDavey Torrium 2 Pressure Controller\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReliable twin stage impeller design\u003c\/li\u003e\n\u003cli\u003eAll stainless steel construction for reliability and the ability to pump hot water up to 80°C\u003c\/li\u003e\n\u003cli\u003eCarbon\/Ceramic mechanical seal for reliable pump operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eMotor:\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTEFC motor constructed from corrosion resistant materials\u003c\/li\u003e\n\u003cli\u003eIP55 international protection rating for a high level of resistance to dust and liquid entry\u003c\/li\u003e\n\u003cli\u003eVoltage variants:\u003cbr\u003e220-240V, 50Hz, 2 pole\u003cbr\u003e220V, 60Hz, 2 pole (\/P models)\u003c\/li\u003e\n\u003cli\u003eClass F insulation\u003c\/li\u003e\n\u003cli\u003eHigher than normal 55°C ambient temperature rating for longer life and improved tolerance to voltage variations for peace of mind, even on the hottest days.\u003c\/li\u003e\n\u003cli\u003eProtected against both high operating temperature and high current draw by a built-in, automatically re-setting, thermal overload\u003c\/li\u003e\n\u003cli\u003ePermanently split capacitor for reliable starting even in low voltage circumstances\u003c\/li\u003e\n\u003cli\u003eMotor and pump are designed for frequent starts\u003cb\u003e \u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eConstant Flow and Even Water Pressure\u003c\/strong\u003e\u003cbr\u003eTo prevent annoying fluctuations in water temperature during showers, Torrium®2 uses its intelligence to provide households with constant flow to give even water pressure. It does this with its innovative pressure and flow sensors to start the pump on a pressure drop and to stop it on low flow (~1 lpm). This avoids pump cycling when there is continuing household demand for water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick Cut-in for Even Pressure\u003cbr\u003e\u003c\/strong\u003eTo give you strong pressure right from the start, Torrium®2 is designed to cut in quickly when it senses demand for water. It cuts in when the pressure has dropped to 80% of the previous top (shut-off) pressure. It uses its intelligence to automatically set this cut-in pressure each time the pump stops. In doing so, it allows the system to automatically accommodate for variations in pump performance or site conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdaptive Starting\u003cbr\u003e\u003c\/strong\u003eTorrium®2 is clever enough to detect the difference between normal water demand and a small leak in the system, such as a dripping faucet or a leaking cistern. For very low flows, Torrium®2 automatically adapts to reduce the cut-in pressure, which can be as low as 50% of its last shut-off pressure. This significantly reduces pump cycling to improve consumer satisfaction with the system. If normal flow is required in the house (\u0026gt;0.5 lpm), Torrium®2 will sense this and revert to normal mode and initiate an immediate pump start.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Status Check\u003cbr\u003e\u003c\/strong\u003eTo easily check the system status, Torrium®2 has three simple LED indicators.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRed LED – the system is in standby mode\u003c\/li\u003e\n\u003cli\u003eGreen LED – the pump is running\u003c\/li\u003e\n\u003cli\u003eYellow LED – fault condition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePressure Indicator Window\u003c\/strong\u003e\u003cbr\u003eTo give a quick guide to the system pressure, Torrium®2 has a pressure indicator window on the side of the inbuilt pressure vessel. If the colour band (green-yellow-red) is mainly green it indicates maximum pressure, whereas mainly red indicates low pressure. This indicator can help to analyse the occurrence of unwanted system leaks. If the colour band indicator is moving slowly towards red this signifies a slow drop in pressure and may indicate a small leak. To give a quick guide to the system pressure, Torrium®2 has a pressure indicator window on the side of the inbuilt pressure vessel. If the colour band (green-yellow-red) is mainly green it indicates maximum pressure, whereas mainly red indicates low pressure. This indicator can help to analyse the occurrence of unwanted system leaks. If the colour band indicator is moving slowly towards red this signifies a slow drop in pressure and may indicate a small leak.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGreater Hydraulic Performance\u003c\/strong\u003e\u003cbr\u003eFor better hydraulic performance to supply more pressure with less wasted energy, Torrium®2 has been designed with larger water pathways and no moving parts in the pathways. This performance versus loss equation is especially evident at higher flow rates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGreater Reliability\u003cbr\u003e\u003c\/strong\u003eTo diminish the likelihood of blockages, Torrium®2 is designed with no moving control parts within the water pathways giving greater reliability and performance with varying water quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry Run Protection and Auto Restart\u003c\/strong\u003e\u003cbr\u003eTo protect the pump from damage due to dry running, Torrium®2 stops the pump when it detects a loss of prime (no water supply) situation. To reduce system downtime, the Torrium®2 waits 5 minutes then goes into auto retry mode, whereby it will restart the pump to see if prime can be re-established automatically. An auto restart occurs at 5 minutes, 30 minutes, 1 hour, 2, 4, 8, 16 and 32 hours. Torrium®2 will also restart if it detects flow through the system (e.g. from mains water pressure returning with pressure boosting applications).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePump Protection – High Water Temperature Cut-out\u003cbr\u003e\u003c\/strong\u003eFor added security and longer life, a water over-temperature cut-out provides a second level of protection against closed head operation and repetitive cycling. For water temperatures above 70°C Torrium®2 will shut the pump down and the amber LED will be lit. When the water temperature drops to below 60°C, the Torrium®2 will allow the pump to restart.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePump Protection – Excessive Electrical Current\u003cbr\u003e\u003c\/strong\u003eTo protect the pump motor, Torrium®2 will shut the pump down and indicate a fault if it detects excessive electrical current being drawn. This occurs if the pump motor is subjected to locked rotor or if someone tries to manually override the Torrium®2 by continually holding in the prime button.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCorrosion and Scale Resistance\u003cbr\u003e\u003c\/strong\u003eTo allow Torrium®2 to be used with water of varying quality, its flow sensors are mounted on a high grade stainless steel plate with special anti-scaling electronic action, which only turns the flow sensors on during pump operation\u003cbr\u003e\u003cstrong\u003eExtra Draw off Capacity\u003c\/strong\u003e\u003cbr\u003eTo accommodate small leaks and to reduce cycling, Torrium®2 has an in-built spring loaded accumulator for extra draw off capacity. A spring loaded accumulator means low maintenance as there is no need for a pressure vessel with its regular air charging and checking. However, for increased draw off, an optional pressure tank, up to 18 litres, can be mounted on the vertical outlet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Surge Protection for Torrium®2\u003cbr\u003e\u003c\/strong\u003eTo protect the Torrium®2 controller from electrical surges and spikes, thus extending its life, it has an in-built metal oxide varistor (MOV). The status of the MOV can be checked in the viewing window on the back of the Torrium®2. The MOV is a sacrificial component and should it be consumed due to repeated power surges or spikes, it will almost always blacken the viewing port. This will indicate a non-warrantable Torrium®2 failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEase of Installation\u003c\/strong\u003e\u003cbr\u003eFor ease of installation, the plumbing can be connected to either the vertical or the right angle discharge outlet, which can rotate a full 360°. A spanner, sized to fit the coupling, is included in the box. Also, for increased draw off, an optional pressure tank, up to 18 litres, can be mounted on the vertical outlet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Connection\u003cbr\u003e\u003c\/strong\u003eFor easy installation, Torrium®2 comes with a 2 metre long power lead, fitted with an Australian three pin plug.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n[\/TABS]"}

Davey HP85-08T Home Pressure System With Torrium 2 Pressure Controller

Product Description

The HP Pressure System consists of an HP pump fitted with a Torrium®2 controller. The Torrium®2 is supplied connected electrically to the HP pump motor for:

  • Easy non-tradesmen installation and assembly
  • Positive safety under varied weather conditions

The combination of the high pressures supplied by the jet assisted HP pump and constant flow control provided by the Torrium®2 enables consumers to enjoy the benefits of a strong comfortable shower from a pump that does not cycle plus the reliability of adaptive technology. The complete HP Pressure System is compact and quiet providing for:

  • Easy installation, especially where space is at a premium
  • Non-intrusive operation, for consumer enjoyment.

All parts of the entire system that are in contact with the water are manufactured from safe, corrosion resistant materials for:

  • Consumer confidence that their water supply will be as good coming out as it was going into the system
  • Ability to use the HP pressure system on a variety of water qualities
  • Compliance with the strict requirements of ISO 9001.2000 quality standards ensures consistency of quality of the system.
      Sku: HP85-08T
      $920.00
      Maximum quantity available reached.

      Ideal for pumping clean, non-volatile liquids without fibres or solids in such applications as:

      • Household water supply
      • Irrigation
      • Water transfer
      • Washing systems
      • Pressure boosting

      Davey Torrium 2 Pressure Controller

      • Reliable twin stage impeller design
      • All stainless steel construction for reliability and the ability to pump hot water up to 80°C
      • Carbon/Ceramic mechanical seal for reliable pump operation

      Motor:

      • TEFC motor constructed from corrosion resistant materials
      • IP55 international protection rating for a high level of resistance to dust and liquid entry
      • Voltage variants:
        220-240V, 50Hz, 2 pole
        220V, 60Hz, 2 pole (/P models)
      • Class F insulation
      • Higher than normal 55°C ambient temperature rating for longer life and improved tolerance to voltage variations for peace of mind, even on the hottest days.
      • Protected against both high operating temperature and high current draw by a built-in, automatically re-setting, thermal overload
      • Permanently split capacitor for reliable starting even in low voltage circumstances
      • Motor and pump are designed for frequent starts 

      Constant Flow and Even Water Pressure
      To prevent annoying fluctuations in water temperature during showers, Torrium®2 uses its intelligence to provide households with constant flow to give even water pressure. It does this with its innovative pressure and flow sensors to start the pump on a pressure drop and to stop it on low flow (~1 lpm). This avoids pump cycling when there is continuing household demand for water.

      Quick Cut-in for Even Pressure
      To give you strong pressure right from the start, Torrium®2 is designed to cut in quickly when it senses demand for water. It cuts in when the pressure has dropped to 80% of the previous top (shut-off) pressure. It uses its intelligence to automatically set this cut-in pressure each time the pump stops. In doing so, it allows the system to automatically accommodate for variations in pump performance or site conditions.

      Adaptive Starting
      Torrium®2 is clever enough to detect the difference between normal water demand and a small leak in the system, such as a dripping faucet or a leaking cistern. For very low flows, Torrium®2 automatically adapts to reduce the cut-in pressure, which can be as low as 50% of its last shut-off pressure. This significantly reduces pump cycling to improve consumer satisfaction with the system. If normal flow is required in the house (>0.5 lpm), Torrium®2 will sense this and revert to normal mode and initiate an immediate pump start.

      Easy Status Check
      To easily check the system status, Torrium®2 has three simple LED indicators.

      • Red LED – the system is in standby mode
      • Green LED – the pump is running
      • Yellow LED – fault condition

      Pressure Indicator Window
      To give a quick guide to the system pressure, Torrium®2 has a pressure indicator window on the side of the inbuilt pressure vessel. If the colour band (green-yellow-red) is mainly green it indicates maximum pressure, whereas mainly red indicates low pressure. This indicator can help to analyse the occurrence of unwanted system leaks. If the colour band indicator is moving slowly towards red this signifies a slow drop in pressure and may indicate a small leak. To give a quick guide to the system pressure, Torrium®2 has a pressure indicator window on the side of the inbuilt pressure vessel. If the colour band (green-yellow-red) is mainly green it indicates maximum pressure, whereas mainly red indicates low pressure. This indicator can help to analyse the occurrence of unwanted system leaks. If the colour band indicator is moving slowly towards red this signifies a slow drop in pressure and may indicate a small leak.

      Greater Hydraulic Performance
      For better hydraulic performance to supply more pressure with less wasted energy, Torrium®2 has been designed with larger water pathways and no moving parts in the pathways. This performance versus loss equation is especially evident at higher flow rates.

      Greater Reliability
      To diminish the likelihood of blockages, Torrium®2 is designed with no moving control parts within the water pathways giving greater reliability and performance with varying water quality.

      Dry Run Protection and Auto Restart
      To protect the pump from damage due to dry running, Torrium®2 stops the pump when it detects a loss of prime (no water supply) situation. To reduce system downtime, the Torrium®2 waits 5 minutes then goes into auto retry mode, whereby it will restart the pump to see if prime can be re-established automatically. An auto restart occurs at 5 minutes, 30 minutes, 1 hour, 2, 4, 8, 16 and 32 hours. Torrium®2 will also restart if it detects flow through the system (e.g. from mains water pressure returning with pressure boosting applications).

      Pump Protection – High Water Temperature Cut-out
      For added security and longer life, a water over-temperature cut-out provides a second level of protection against closed head operation and repetitive cycling. For water temperatures above 70°C Torrium®2 will shut the pump down and the amber LED will be lit. When the water temperature drops to below 60°C, the Torrium®2 will allow the pump to restart.

      Pump Protection – Excessive Electrical Current
      To protect the pump motor, Torrium®2 will shut the pump down and indicate a fault if it detects excessive electrical current being drawn. This occurs if the pump motor is subjected to locked rotor or if someone tries to manually override the Torrium®2 by continually holding in the prime button.

      Corrosion and Scale Resistance
      To allow Torrium®2 to be used with water of varying quality, its flow sensors are mounted on a high grade stainless steel plate with special anti-scaling electronic action, which only turns the flow sensors on during pump operation
      Extra Draw off Capacity
      To accommodate small leaks and to reduce cycling, Torrium®2 has an in-built spring loaded accumulator for extra draw off capacity. A spring loaded accumulator means low maintenance as there is no need for a pressure vessel with its regular air charging and checking. However, for increased draw off, an optional pressure tank, up to 18 litres, can be mounted on the vertical outlet.

      Power Surge Protection for Torrium®2
      To protect the Torrium®2 controller from electrical surges and spikes, thus extending its life, it has an in-built metal oxide varistor (MOV). The status of the MOV can be checked in the viewing window on the back of the Torrium®2. The MOV is a sacrificial component and should it be consumed due to repeated power surges or spikes, it will almost always blacken the viewing port. This will indicate a non-warrantable Torrium®2 failure.

      Ease of Installation
      For ease of installation, the plumbing can be connected to either the vertical or the right angle discharge outlet, which can rotate a full 360°. A spanner, sized to fit the coupling, is included in the box. Also, for increased draw off, an optional pressure tank, up to 18 litres, can be mounted on the vertical outlet.

      Electrical Connection
      For easy installation, Torrium®2 comes with a 2 metre long power lead, fitted with an Australian three pin plug.

                        QUICK QUERY FORM

                        ANY PRODUCT QUESTION?

                        Please fill out the form and we will get in touch with you shortly

                        Related Products

                        Net Orders Checkout

                        Item Price Qty Total
                        Subtotal $0.00
                        Shipping
                        Total

                        Shipping Address

                        Shipping Methods