{"id":1848102977606,"title":"Bianco BIA-RAINSAVERMK4E Tank\/Mains Changeover","handle":"bianco-bia-rainsavermk4e-tank-mains-changeover","description":"\u003cp\u003e\u003cspan\u003eThe Rainsaver MK4e replaces all changeover devices including the Davey Rainbank and Onga Waterswitch and converts manual pumps to a fully automatic mains and tank water changeover device in a jiffy. The changeover device is suitable for mains and pump flows up to 100 litres per minute and mains and pump pressure of 800kPa. The MK4e is suitable for pumps up to 1.1kW running on a 240V system and includes a plug and play power connection. You will still require to buy a pressure controller when replacing a Davey Rainbank and Onga Waterswitch, as these units have them built in. If the change-over device you are changing has a separate pressure controller that is functional, then you will not require a new pressure controller.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump is characterised by:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrosion resistant pump components.\u003c\/li\u003e\n\u003cli\u003eFully automatic operation.\u003c\/li\u003e\n\u003cli\u003eSilicon Carbide mechanical seal.\u003c\/li\u003e\n\u003cli\u003e240V single phase motor with in-built auto reset thermal overload.\u003c\/li\u003e\n\u003cli\u003e10m of power cable.\u003c\/li\u003e\n\u003cli\u003eNot suitable for construction sites, ponds, fountains or bio-treatment.\u003c\/li\u003e\n\u003cli\u003eFlows to 83 l\/m\u003c\/li\u003e\n\u003cli\u003eHeads to 30m\u003c\/li\u003e\n\u003cli\u003eMaximum particle size 0.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n[TABS]\n\u003ch5\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAesthetically designed and requires no weatherproofing.\u003c\/li\u003e\n\u003cli\u003eBarrel Unions and “Torque Set” safety spanner are included to facilitate ease of servicing and to avoid tool damage or over tightening\u003c\/li\u003e\n\u003cli\u003eUV Stabilized technopolymer for long life and good looks\u003c\/li\u003e\n\u003cli\u003eAll Rainsaver MK3e pumps are independently controlled to regulate flows and pressures whilst protecting the pump against voltage fluctuations, loss of water and incorporate a 24-hour automatic pump restart\u003c\/li\u003e\n\u003cli\u003eWATERMARK approved for connection to all Towns Water supplies – Safe against waterborne bacteria, dezincification and lead poisoning\u003c\/li\u003e\n\u003cli\u003eAuxiliary outlets allow for energy saver water storage – pressure vessels to reduce pump starts\u003c\/li\u003e\n\u003cli\u003eRevolutionary “Mono Channel” design does not restrict flow or reduce pressures, eliminates any possibility of water leaks\u003c\/li\u003e\n\u003cli\u003e12-volt low voltage flow switch with counterweight and mozzie stopper ensures total reliability and safety within 10m cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. flow\u003c\/strong\u003e:  100 litres \/ minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure: \u003c\/strong\u003e800kPa \/ 116psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Power \u003c\/strong\u003e: 1.5hp \/ 1.1kW \/ 240V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material: \u003c\/strong\u003e Technopolymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e Watermark and IP33 Rated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Lead\u003c\/strong\u003e: 2 meters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow voltage Float Switch cable\u003c\/strong\u003e: 10 meters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 2 Years\u003c\/li\u003e\n\u003cli\u003eAS\/NZS 4020 approved for drinking water\u003c\/li\u003e\n\u003c\/ul\u003e\n[\/TABS]","published_at":"2018-11-12T14:36:46+11:00","created_at":"2018-11-15T20:12:09+11:00","vendor":"Bianco","type":"Outdoor","tags":["Brand_Bianco","Category_Outdoor","Price_$200 to $300","Sub Category_Water Tanks"],"price":29900,"price_min":29900,"price_max":29900,"available":true,"price_varies":false,"compare_at_price":32100,"compare_at_price_min":32100,"compare_at_price_max":32100,"compare_at_price_varies":false,"variants":[{"id":18653468786758,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MK4e","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bianco BIA-RAINSAVERMK4E Tank\/Mains Changeover","public_title":null,"options":["Default Title"],"price":29900,"weight":99990,"compare_at_price":32100,"inventory_management":"shopify","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0023\/9881\/4278\/products\/bia-mk4e-e1450397288722.jpg?v=1542273373","\/\/cdn.shopify.com\/s\/files\/1\/0023\/9881\/4278\/products\/mk4e.jpg?v=1542273381"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0023\/9881\/4278\/products\/bia-mk4e-e1450397288722.jpg?v=1542273373","options":["Title"],"content":"\u003cp\u003e\u003cspan\u003eThe Rainsaver MK4e replaces all changeover devices including the Davey Rainbank and Onga Waterswitch and converts manual pumps to a fully automatic mains and tank water changeover device in a jiffy. The changeover device is suitable for mains and pump flows up to 100 litres per minute and mains and pump pressure of 800kPa. The MK4e is suitable for pumps up to 1.1kW running on a 240V system and includes a plug and play power connection. You will still require to buy a pressure controller when replacing a Davey Rainbank and Onga Waterswitch, as these units have them built in. If the change-over device you are changing has a separate pressure controller that is functional, then you will not require a new pressure controller.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump is characterised by:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrosion resistant pump components.\u003c\/li\u003e\n\u003cli\u003eFully automatic operation.\u003c\/li\u003e\n\u003cli\u003eSilicon Carbide mechanical seal.\u003c\/li\u003e\n\u003cli\u003e240V single phase motor with in-built auto reset thermal overload.\u003c\/li\u003e\n\u003cli\u003e10m of power cable.\u003c\/li\u003e\n\u003cli\u003eNot suitable for construction sites, ponds, fountains or bio-treatment.\u003c\/li\u003e\n\u003cli\u003eFlows to 83 l\/m\u003c\/li\u003e\n\u003cli\u003eHeads to 30m\u003c\/li\u003e\n\u003cli\u003eMaximum particle size 0.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n[TABS]\n\u003ch5\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAesthetically designed and requires no weatherproofing.\u003c\/li\u003e\n\u003cli\u003eBarrel Unions and “Torque Set” safety spanner are included to facilitate ease of servicing and to avoid tool damage or over tightening\u003c\/li\u003e\n\u003cli\u003eUV Stabilized technopolymer for long life and good looks\u003c\/li\u003e\n\u003cli\u003eAll Rainsaver MK3e pumps are independently controlled to regulate flows and pressures whilst protecting the pump against voltage fluctuations, loss of water and incorporate a 24-hour automatic pump restart\u003c\/li\u003e\n\u003cli\u003eWATERMARK approved for connection to all Towns Water supplies – Safe against waterborne bacteria, dezincification and lead poisoning\u003c\/li\u003e\n\u003cli\u003eAuxiliary outlets allow for energy saver water storage – pressure vessels to reduce pump starts\u003c\/li\u003e\n\u003cli\u003eRevolutionary “Mono Channel” design does not restrict flow or reduce pressures, eliminates any possibility of water leaks\u003c\/li\u003e\n\u003cli\u003e12-volt low voltage flow switch with counterweight and mozzie stopper ensures total reliability and safety within 10m cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. flow\u003c\/strong\u003e:  100 litres \/ minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure: \u003c\/strong\u003e800kPa \/ 116psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Power \u003c\/strong\u003e: 1.5hp \/ 1.1kW \/ 240V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material: \u003c\/strong\u003e Technopolymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e Watermark and IP33 Rated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Lead\u003c\/strong\u003e: 2 meters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow voltage Float Switch cable\u003c\/strong\u003e: 10 meters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 2 Years\u003c\/li\u003e\n\u003cli\u003eAS\/NZS 4020 approved for drinking water\u003c\/li\u003e\n\u003c\/ul\u003e\n[\/TABS]"}

Bianco BIA-RAINSAVERMK4E Tank/Mains Changeover

Product Description

The Rainsaver MK4e replaces all changeover devices including the Davey Rainbank and Onga Waterswitch and converts manual pumps to a fully automatic mains and tank water changeover device in a jiffy. The changeover device is suitable for mains and pump flows up to 100 litres per minute and mains and pump pressure of 800kPa. The MK4e is suitable for pumps up to 1.1kW running on a 240V system and includes a plug and play power connection. You will still require to buy a pressure controller when replacing a Davey Rainbank and Onga Waterswitch, as these units have them built in. If the change-over device you are changing has a separate pressure controller that is functional, then you will not require a new pressure controller.

The pump is characterised by:

  • Corrosion resistant pump components.
  • Fully automatic operation.
  • Silicon Carbide mechanical seal.
  • 240V single phase motor with in-built auto reset thermal overload.
  • 10m of power cable.
  • Not suitable for construction sites, ponds, fountains or bio-treatment.
  • Flows to 83 l/m
  • Heads to 30m
  • Maximum particle size 0.5mm
        Sku: MK4e
        $321.00
        Maximum quantity available reached.
        • Aesthetically designed and requires no weatherproofing.
        • Barrel Unions and “Torque Set” safety spanner are included to facilitate ease of servicing and to avoid tool damage or over tightening
        • UV Stabilized technopolymer for long life and good looks
        • All Rainsaver MK3e pumps are independently controlled to regulate flows and pressures whilst protecting the pump against voltage fluctuations, loss of water and incorporate a 24-hour automatic pump restart
        • WATERMARK approved for connection to all Towns Water supplies – Safe against waterborne bacteria, dezincification and lead poisoning
        • Auxiliary outlets allow for energy saver water storage – pressure vessels to reduce pump starts
        • Revolutionary “Mono Channel” design does not restrict flow or reduce pressures, eliminates any possibility of water leaks
        • 12-volt low voltage flow switch with counterweight and mozzie stopper ensures total reliability and safety within 10m cable.
        • Max. flow:  100 litres / minute
        • Max Pressure: 800kPa / 116psi
        • Max Power : 1.5hp / 1.1kW / 240V
        • Body Material:  Technopolymer
        • Rating: Watermark and IP33 Rated
        • Power Lead: 2 meters
        • Low voltage Float Switch cable: 10 meters
        • Warranty: 2 Years
        • AS/NZS 4020 approved for drinking water

        QUICK QUERY FORM

        ANY PRODUCT QUESTION?

        Please fill out the form and we will get in touch with you shortly

        Related Products

        Net Orders Checkout

        Item Price Qty Total
        Subtotal $0.00
        Shipping
        Total

        Shipping Address

        Shipping Methods