Bianco RS4e-INOXG60MPCX Tank to Mains Change Over Pump

Hover to zoom and click to enlarge

More Views

Bianco RS4e-INOXG60MPCX Tank to Mains Change Over Pump

Availability: In stock

Bianco RS4e-INOXG60MPCX Tank to Mains Change Over Single Storey Rainsaver Pump Fully electronic pumps designed for domestic water supply for urban and rural water storage tanks. Designed completely from nonferrous materials to avoid the effects of corrosion. Automatic electronic pump control provides constant pressure at low to full flows and provides dry run protection. The auto restart looks for water if the pump runs out. Automatic control incorporates electrical surge protection, rotatable pump connection and in-built check valve. The pump is a surface mounted pressure system pump supplied ready to install. The unit is ideal for flooded suction and can handle suction lifts to 3m. The Rainsaver MK4e replaces all changeover devices including the Davey Rainbank and Onga Waterswitch and converts manual pumps to a fully automatic mains and tank water changeover device in a jiffy. The changeover device is suitable for mains and pump flows up to 100 litres per minute and mains and pump pressure of 800kPa. The MK4e is suitable for pumps up to 1.1kW running on a 240V system and includes a plug and play power connection. The auto-restart pump controller looks for rain water and uses a low voltage float switch for safety. To find a operating instructions and a manual please click here. Motor / power: 450W Max. flow: 55 litres / minute Taps: 5 taps Head: 37m Suction hose diameter: 1″ / 25mm Pressure: 320kPa Body Material: Stainless Steel Weight: 8kg L 400mm x W 235mm x H 445mm Warranty on pump: 2 Years AS/NZS 4020 approved for drinking water The pump is characterised by: Includes fully electronic pump controller for automatic pump starting, stopping and restart after power loss and water loss. Run dry protection to prevent pump damage Automatic electronic control has in-built check valve to prevent water backflow through the pump. 2.2bar pump cut in for greater versatility. Corrosion resistant pump body, diffuser and impeller to ensure pump durability High quality mechanical shaft seal and high quality bearings 240V single phase TEFC motor with in-built auto reset thermal overload to prevent the pump from overheating. Control Features: Proven components Requires no power supply and consumes no electrical energy Designed to operate with pumps and mains up to 1000 kPa (145 psi) Pump flows to 105 l/m, mains flows to 40 l/m (at 500kPa mains) Designed to further save water resources by reducing incoming mains to 200 kPa Requires no weather proofing Can be mounted any distance from the pump underground or inside a tank Completely waterproof – Can be hosed down without the fear of electrocution UV stabilised technopolymer for long life and good looks All Rainsaver MK5 pumps are independently controlled to regulate flows and pressures whilst protecting the pump against voltage fluctuations, loss of water and incorporate a 24 hour automatic pump restart WaterMark approved components for connection to all Town Water supplies. Safe against water borne bacteria, dezincification and lead poisoning No unsightly controller power, water level float cables or the need for a dedicated controller power point Australian owned and designed
AU $599.00
Model Bianco RS4e-INOXG60MPCX Tank to Mains Change Over Pump
Brand Bianco
Warranty 2 Years



Please fill out the form and we will get in touch with you shortly

  • Reload captcha
    Attention: Captcha is case sensitive.